Software upgrade & help

EC-Lab^® V10.19
(On the Web December 12, 2011)

• Full version with manuals & Tera Term Pro (37.0 MB)
• EC-Lab^® detailed history

Warning:

• For first VMP2 units with a limited board memory - until S/N 0060 please use the archived version V10.12 below.
• If the version previously installed was V8.00 or higher, you will be prompted for a fast and automatic firmware upgrade when establishing the first connection to the instrument. This firmware upgrade will be using the Ethernet connection only and thus you will not need the serial connection. If the version previously installed was V7.01 or lower, you will need to install a new firmware (included in EC-Lab full version with manuals & Tera Term Pro download) using a serial communication. See the latest VMP or VMP2 or MPG user's manual for firmware installation.

Note:

• The setup program installs the PDF files into the "./Manual" folder ("." being the directory where the EC-Lab has been installed). Then the manual can be opened directly or with EC-Lab through the menu : "?, Manual".
• Archived EC-Lab^® V10.12

EC-Lab^® Express V5.52
(On the Web December 12, 2011)

• Full version with manuals (18.9 MB)
• EC-Lab^® Express detailed history

EC-Lab^® development package V5.29
(On the Web August 11, 2011)

• EC-Lab^® development package
• EC-Lab^® development package detailed history

FC-Lab^® V5.22
(On the Web May 31, 2011)

• Full version (57.35 MB)
• FC-Lab^® detailed history

Please click here

Important information

• The links marked with a requires a login and password which will be emailed (by a human) to you once you register your instrument.
• You can use the following link to register your instrument or ask for help.
• Please use the following link to fill our online survey. It is very important for us to know where we need to improve.
• The username & password have changed June 22, 2010, you may need to register again.