Bio-Logic: Software upgrade & help

Software upgrade & help

JTS-10 Software V1.21 (Online November 24, 2011)

Click here to download the software
Software detailed history

JTS-10 software/hardware compatibility

The JTS-10 software was modified to work with the new PCIe-6535 from National Instruments. A standard PCI express slot is needed to install the plug-and-play board. The previous board PCI 6533 is still supported by version 1.21 and higher.
Note: the NIDAQmx drivers V9.1.1 or higher is needed for the JTS-10 software V1.20 or higher.

JTS-10 Manual V1.21 (Online November 24, 2011)

Software installation

Create an empty directory, unzip the downloaded file in this directory and run <setup.exe> from the JTS-10 sub-directory. Do not install this new version over a previous one : rename the directory or use a different one.
After connecting the JTS-10 control unit to the USB port of the computer, you will be asked for a driver. Select the driver_usb_2000_xp directory from the installation package.
Also please look at technical note #0: JTS-10 hardware and software installation.

Note : This version requires Windows2000, WindowsXP, Win7-32 or Win7-64 and the NI-DAQ drivers supplied with the PCI-6535 from NI. See the following link to download the drivers.

Application notes
( November 8, 2011 )

AN#1 - The advantages of using green light to follow fluorescence changes.
AN#2 - Cyclic and linear eletron flow in plants revealed by JTS-10 spectrometer.
AN#3 - Cyclic electron flow in C3 plants.

Technical notes
(accessible to registered users only - List updated on November 8, 2011)

TN#0 - Hardware and software installation (updated November 8, 2011)
TN#1 - Use of Eukaryote Kit in Absorbance mode - ECS measurement with PSI excitation.
TN#2 - Use of Eukaryote Kit in Absorbance mode - ECS measurement with PSI and PSII excitation.
TN#3 - Use of Eukaryote Kit in Fluoresccence mode - OJIP measurement using Fluo-59 accessory.
TN#4 - Use of Eukaryote Kit in Fluorescence mode - NPQ measurement using Fluo-59 accessory.
TN#5 - Use of Cytochrome Eukaryote Kit in Absorbance mode - Cytochrome b and f measurement with PSI excitation.
TN#6 - Use of P700-705 Kit in Absorbance mode - P700 and PC measurements with PSI and PSII excitation.
TN#7 - Use of P700-705 Kit in Absorbance mode - P700 and PC measurements with PSI excitation.
TN#8 - Interfacing a laser to JTS-10

Important Notes

The links marked with a requires a login and password which will be emailed (by a human) to you once you register your instrument.
You can use the following link to register your instrument or ask for help.
Please use the following link to fill our online survey. It is very important for us to know where we need to improve.
The username & password have changed October 1^st 2007, you may need to register again.